LuxaLight drivers

Blog

Architecture (44)
Industry (76)
LED moulding (18)
LuxaLight (172)
Manima Technologies (98)
Zirqle LED solutions (44)

LuxaLight has developed drivers especially for frequently occurring issues in the professional market. All drivers designed by LuxaLight have 5 PWM controlled output channels, each of which can be loaded up to 20 Amps. The driver is suitable for LED installations operating on voltages between 12 and 48 Volt.

Customization options

All luxalight voltage drivers offer options for customer-specific applications. This option is available because the company's own software is used.

The different drivers:

  • Voltage driver LuxaLight 5 channels 20 Amp with DMX512 control. By means of a DMX512 signal, the brightness for each channel can be set separately. With DMX512, color effects can also be set when using RGB strips in the installation. With color temperature strips, the color temperature can be adjusted with DMX512 due to the ratio between warm white and cool white. The desired DMX address can be set with DIP switches. A DMX terminator can also be switched on on the board.
  • Voltage driver LuxaLight 5 channels 20 Amp RGBW controller. This version is a full RGB controller. The brightness, color or color temperature of the LED strips can be adjusted at any time via the PC / laptop. Color gradients can also be programmed in the controller where the controller runs through the color spectrum. The color gradients can also be stored in the EEPROM of the controller after which the voltage driver uses it.
  • Voltage driver LuxaLight 5 channels 20 Amp with Real Time Clock. With a PC with USB cable, the Real Time Clock can be programmed using a terminal program or a PC program with a graphical interface. With this, the brightness of the five voltage channels can be set at set times, or channels can be switched on or off. The lighting can not only be switched on and off per channel, but also dimmed. This can be used, for example, for building lighting, aquarium lighting and home automation where lighting inside and / or outside buildings and grounds is controlled.
  • Voltage driver LuxaLight 5 channels 20 Amp for voltage drop compensation. This LED strip driver can supply 100A at 24V and with that you can control extremely large installations up to 2400W. The PWM dimming value can be preset. This is stored in an EEPROM and these values ​​are used immediately when turning on the voltage driver. This is very useful for controlling voltage drop in the connection cables in LED strip installations. Especially when the voltage drop between the cables is different due to the length of the LED strips and the cables going there to the driver. By calculating this in the PWM value, the LED strips can still be adjusted equally brightly.

Some projects where LuxaLight drivers have been applied:

 

Blog categories
LuxaLight