LuxaLight Pixel LED-strip GS8208 12V Digital RGB Protected High Power (12 Volt, 96 LEDs, 5050, IP64)

LS12RGB96GS8208VPLX
LuxaLight Pixel LED-strip GS8208 12V Digital RGB Protected High Power (12 Volt, 96 LEDs, 5050, IP64)
LuxaLight Pixel LED-strip GS8208 12V Digital RGB Protected High Power (12 Volt, 96 LEDs, 5050, IP64)
LuxaLight Pixel LED-strip GS8208 12V Digital RGB Protected High Power (12 Volt, 96 LEDs, 5050, IP64)
LuxaLight Pixel LED-strip GS8208 12V Digital RGB Protected High Power (12 Volt, 96 LEDs, 5050, IP64)

Log in or register to view prices

Bulk prices

Log in or register to view prices

  • Free shipping within NL for € 250+ orders
  • B2B only

Our measuring results

CIE1931 RED CIE1931 RED
CIE1931 GREEN CIE1931 GREEN
CIE1931 BLUE CIE1931 BLUE
Wave Length RED Wave Length RED
Wave Length GREEN Wave Length GREEN
Wave Length BLUE Wave Length BLUE

Highlights



Technical specifications

General
 
Brand
LuxaLight
LEDs / meter
96
LED type
5050
Length per reel
10 m
LED strip width
12.00 mm
LED strip thickness
4.00 mm
PCB color
White
Mantle material
Silicon
Warranty
5 years
Lifetime
50000 hours
Lighting
 
Luminous Flux
1080 lm
Luminous flux red
320 lm
Luminous flux green
464 lm
Luminous flux blue
296 lm
Wave length Red
620~630 nm
Wave length Green
510~525 nm
Wave length Blue
455~470 nm
BIN
3 SDCM
Beam angle
120 °
Electronics
 
Working voltage
12V
Current / meter
1.60 A / meter
Power consumption per meter
19.20 W / meter
PCB material
Copper
Control
 
Number of channels
3
IC type
GS8208
Environmental
 
Operating temperature min
-25.00 °C
Operating temperature max
70.00 °C
Storage temperature min
-20.00 °C
Storage temperature max
60.00 °C
IP class
IP 64
Directives - standards - certificates
 
Directives
RoHS 2002/95/EC Compliant
EMC 2004/108/EC Compliant
CE Marking
Safety standards
EN60598-1
IEC62471
EN62031

Product description

LuxaLight pixel LED-strip GS8208 12V digital RGB protected high power is characterized by high durability and a long service life, even under more severe conditions and in demanding situations. The color difference within a batch (BIN) is 3 SDCM.

These LED-strips have the GS8208 IC embedded in the LED, making it possible to control each LED separately in color and brightness. Digital control is done by means of data 1. Data 2 is a backup signal. A faulty LED on data 1 will skip one digital LED and data 2 will replace data 1.

The LED has a built-in signal conditioning circuit to transfer the digital signal to the next LED input without distortion. The refresh rate is 30fps for low speed 512 pixels and high speed not less than 1024 points. Sending data speed can be with 800 kbps.

Improvement of the light colors and a good white balance through gamma correction.

More information about Digital LED solutions