Light and motion sensor for LED lighting 100W
This is a LED motiondetector for indoor use. This sensor uses high-frequency electromagnetic waves to detect motion. First it transmits an electromagnetic field and then the sensor receives the echo from this signal and detects any movement. Because the detector does not work with infrared light but with high frequency signals he detects movements through doors, windows or thin walls.
The detector operates on 220 - 240VAC and has an output with the same voltage. This may for example be a lamp or a power supply for LED lighting. The output can switch a capacitive load up to 400W or 1200W to a resistive load.
Using dip switches the motion detector settings can be set. There are three functions that are set: the range where the detector must respond, time how long the output stays on and it is adjustable to the motion only in a certain light level work, so for example the light on the output only reacts on motion when it is dark. Each function can be regulated in 5 steps.
On the front of the housing there is a label indicating the exact operation of the DIP switches. This label is also shown at the images of this product. Here you will also find the manual of the product.
Power supply: 220-240VAC
Switching capacity: Max. 100W
Standby power: <0.5W
Warm-up time: 20 seconds
Reaction Field: 10% / 25% / 50% / 75% / 100% of the total, may be adjusted
To keep time: 5sec / 30sec / 1min / 5min / 15min / 30min, can be customized
Microwave frequency: 5.8GHz (+/- 75MHz)
Microwave power: <0.2mW
Motion detection area: Max. (Ø x h) 12m x 6m
Motion detection angle: 30°~150°
IP-rating: IP44
For more information about the LED motion click on the link below :
https://www.ledtuning.nl/en/blog/tutorial-of-the-led-motion-detector